PX100D_Manual_en-1.17.2i10
Page 57 / 59
Transmission state signaling description
– in SIA transmission, single blink
means positive acknowledgment. Multiple blinks means negative acknowledgment
or lack of transmission acknowledgment.
In case of ContactID transmission, each LED blink means reception of Kissoff
signal.
10.4.
DEVICE BUFFER INDICATION
PX100D is indicating state of events buffer when there is no outgoing transmission.
Buffer state signalling is
on when there is no
outgoing transmission
(green LED is off)
Pending event indication for Monitoring Station #1:
-
LED turn on
– pending events in buffer
-
LED turn off
– no pending events
Pending event indication for Monitoring Station #2
(if used):
-
LED turn on
– pending events in buffer
-
LED turn off
– no pending events
10.5.
PROGRAMMING
After detection of programming wire diodes indicate programming.
Description
LED Diodes
Green
Red
Connected
Service
wire
Programming
in CSD mode