PX100D_Manual_en-1.17.2i10
Page 13 / 59
6.
CONFIGURATION PROGRAM
6.1.
INITIAL REMARKS
GPRS transmitters configurator
may be downloaded at
(login:
ebs
,
password: ebs). To install program an installation wizard shall be started that
performs installation in default place C:\Program Files\EBS\. During installation
process shortcuts on screen and Windows menu are created.
If device is to be used for the first time it shall be programmed with the above
program and after this procedure the SIM card may be inserted into the device.
Otherwise SIM card may be blocked if wrong PIN code is entered. Alternatively
SIM card may be used along with switched off PIN code.
I
n case of remote programming it is necessary to insert SIM card prior to sending
configuration settings. In this situation SIM card with switched off PIN code shall be
used or before card inserting, PIN code shall be changed with mobile phone.
6.2.
COMPUTER – REQUIREMENTS
Minimum requirements for computer system where configuration software is to be
installed:
Hardware:
o
Processor Pentium II 400 MHz,
o
64 MB RAM,
o
1 GB HD.
o
CD-ROM,
o
RS-232 serial port
o
Colour monitor (minimum 15 inch , min. 800x600 resolution),
o
Keyboard
o
Mouse
Software:
o
Operation system Windows 2000, Windows XP or Windows Vista
o
NET Framework 2.0 (delivered along with installation wizard of configuration).
6.3.
PROGRAM FUNCTIONS
After installation and program starting a main view shall be displayed on screen.
Thanks to this view an access to program or programmable parameters of device is
possible.(See chapter 7).
Main window of program is divided into some fields.