AVA PRO - Assembly instructions for the CPX300W alarm control panel
8
/
23
3.
SYSTEM STRUCTURE
The CPX300W alarm control panel can be extended with 4 additional modules
MOD-GSM-2G / MOD-GSM-3G (including 2 nano SIM holders) - cellular network communication
module 2G or 3G,
MOD-ETH - wired Ethernet module / MOD-WIFI communication module – wireless Wi-Fi module,
MOD-RF433– 433 MHz RF communication module,
MOD-ZWAVE - communication module with Smart Home devices.
3.1.
Alarm control panel motherboard
3.1.1.
Description of PCB elements and screw connectors
Fig. 1. Main view of the CPX300W board.
(
START
) - a button is used to start the control panel with a connected battery, but without the mains
power supply.
(
MODE
) - user base formatting button, including installer code. To run the process press the button,
turn on the power supply of control panel holding for approx.10 second MODE button. At the beginning
of the process, the blue LED next to the button will flash quickly. Completion will be signalled by slow
flashing - it is a sign of deleting users process was successful and you should release the button.
(
ADD+
) - a button enabling the control panel to switch into the mode of adding wireless devices.
After pressing the button, the control panel will enter into the pairing state, which will be signalled by
the yellow LED above the button (see item 15). Note: To exit the pairing mode, press EXIT button (see
item 15).
(
DEL-
) - a button that allows you to delete all paired devices from the control panel.
