AVA PRO - Assembly instructions for the CPX300W alarm control panel
11
/
23
3.2.4.
GSM antenna
The module is adapted to work with a GSM antenna with an SMA male connector. It is delivered
separately as one of the optional system components.
The antenna should be installed (glued) to a non-metallic substrate (wood, plastics, glass, etc.) in a
vertical position. Antennas should not be installed in the immediate vicinity of metal objects (including,
for example, cable bundles) or inside the housings (with special regard to metal housings). During
installation, avoid sharp bends of the cable and extending it.
NOTE:
The antenna can’t be installed on the control panel housing, near the wireless system receiver.
This position can significantly reduce its range.
3.2.5.
Technical parameters of the GSM module
Table 2. Technical parameters of the GSM module.
Module variant
2G
3G
Modem
SARA-G350
SARA-U201
Supported
frequency bands
2G
850 MHz (GSM)
900 MHz (E-GSM)
1800 MHz (DCS)
1900 MHz (PCS)
850 MHz (GSM)
900 MHz (E-GSM)
1800 MHz (DCS)
1900 MHz (PCS)
3G
none
800MHz (B19)
850MHz (B5)
900MHz (B8)
1900MHz (B2)
2100MHz (B1)
Packet transmission
technologies (PS)
GPRS Class 10
GPRS Class 12
EDGE Class 12
HSDPA Cat 8
HSUPA Cat 6
SIM card format:
Nano-SIM (4FF)
Nano-SIM (4FF)
Dual SIM:
YES
YES
Chip SIM (MFF2):
option
option
Main antenna connector:
SMA, female, straight
SMA, female, straight
Detection of jamming:
YES
YES
Dimensions:
69 mm x 30 mm
3.3.
ETHERNET
3.3.1.
Description
Ethernet wired communication module cooperating with the CPX300W alarm control panel, powered
directly from the control panel motherboard. The module enables connection of the control panel to the
Ethernet type network.
