24
Temperature menu
TEMP
The temperature menu contains the functions that in some way concern direct tem-
perature regulation. This is where the set point, hysteresis and temperature alarm
are set. The temperature menu is reached via
TEMP
in the
MAIN MENU
.
Set point
TEMP
The set point can be set to an accuracy of 0.5 degrees and is set in two overlapping
ranges. The lower temperature range is from -15 °C to +75 °C and the upper from 0 °C
to +150 °C. The factory setting is +40 °C or +100 °C depending on the temperature
range selected.
The set point setting is under
TEMP
in the
TEMP
menu. Set the required temperature
by pressing
or
and then confirm with
.
Operation mode Industry is used to regulate the temperature of
industrial processes, high temperatures or for the frost protection of
sensitive installations. Temperatures within the ranges -15 °C to +75
°C and 0 °C to +150 °C can be regulated in this mode or the range
can be limited to between -10 °C and +15 °C for frost protection
purposes. It is also possible to adjust temperature hysteresis and
set upper and lower temperature alarms.
Main menu
MAIN MENU
The
MAIN MENU
contains three submenus:
TEMPERATURE
,
PROGRAM
and
SYSTEM
.
From display mode, go to the
MAIN MENU
by pressing once. Use the or
buttons to move between the menus and confirm using .
If you do not press a button for 30 seconds, the thermostat returns to dis-
play mode; you can also return to display mode by selecting
EXIT
.
Operation mode Industry
* Read more about temperature hysteresis and how to set it on page 23.
PROGRAM
LOW TEMP
HIGH TEMP
FROST PRO
EXIT
SYSTEM
LANGUAGE
DATE/TIME
S/W TIME
SENSOR
RESET
EXIT
EXIT
DISPLAY MODE
M
A
IN MENU
TEMP
TEMP
TEMP HYS
EXIT
ALARMS
