19
The programs are in the
MAIN MENU
under
PROGRAM
. To change program,
browse using or and select using . The manual program is the fac-
tory setting, i.e. you set the required temperature (set point) and the ther-
mostat maintains that temperature.
Program for home environment
HOME
The temperature is raised by 5 °C at the following times:
Monday–Friday 08:30–15:00 and every day between 23:00–05:00.
The home environment program is under
PROGRAM
in the
MAIN MENU
. Select
HOME
using and a message is shown for two seconds to confirm that the
program has been activated. You can then see in display mode that the pro-
gram is active when
HOME
is shown on the second row.
The temperature can be set b5 °C and +45 °C. The thermostat works
from the temperature that is set in the manual program where the factory
setting is +22 °C. If you change the temperature in the manual program, or
set point in the
TEMP
menu, the thermostat works from the new temperature,
and lowers the temperature by +5 °C from the new temperature.
Program for office environment
OFFICE
The temperature is raised automatically by 5 °C apart from at the following
times:
Monday–Friday 06:00–18:00.
The office environment program is under
PROGRAM
in the
MAIN MENU
. Select
OFFICE
using and a message is shown for two seconds to confirm that
the program has been activated. You can then see in display mode that the
program is active when
OFFICE
is shown on the second row.
The temperature can be set b5 °C and +45 °C. The thermostat works
from the temperature that is set in the manual program where the factory
setting is +22 °C. If you change the temperature in the manual program, or
set point in the
TEMP
menu, the thermostat works from the new temperature,
and lowers the temperature by +5 °C from the new temperature.
Holiday program
HOLIDAY
This program is intended for protection against over heating of, for example,
electronic equipment in premises that are empty or unused for long periods,
such as holiday homes and storerooms, or longer periods of absence from
the normally used accommodation. The holiday program can be controlled
via a remote control unit. There are three menu alternatives to choose
between under
HOLIDAY
:
ACTIVATE
,
CHANGE
and
RESET
.
HOLIDAY
is under
PROGRAM
in the
MAIN MENU
. The temperature can be set
b20 °C and +40 °C; the factory setting is +27 °C.
