EBECO EB-Therm 800, Руководство пользователя

Страница: 10 / 36

10
Connection time
[press ]
To see the total and momentary connection times*, press when the
thermostat is in display mode. The counter shows the total hours the
thermo stat has been connected for as well as the momentary time,
in the same way as a vehicle trip meter, i.e. the number of hours the
installation has been connected for since the counter was reset. The
connection time is used to calculate the energy consumption** of the
installation.
The momentary counter is reset in the
SYSTEM MENU
under
RESET
and
COUNTER
; both counters are reset if the thermostat is reset to factory
settings. To return to display mode, press or wait thirty seconds.
*Connection time = the time that the thermostat has been activated, i.e.
how long the heating or cooling installation has been connected for.
**Energy consumption (kWh) = Installed effect (kW) x Connection time (h)
Shortcut to language setting
[press 3 s]
To change the language setting without going through the menu
system, press when the thermostat is in display mode. Then you
come directly to the language menu (read more about the language
menu under the section concerning the selected operation mode).
Shortcut to temperature setting
[press 3 s]
To quickly change the temperature setting without going through the
main menu, go to display mode and press for three seconds; this
takes you directly to temperature setting (set point).
Standby mode
[press 3 s]
When the thermostat is in standby mode, the temperature is not regu-
lated and the screen is inactive, but the clock runs as usual and all the
settings are stored in the memory. Note that the thermostat is still
supplied with electricity.
Standby mode is set from the display mode by pressing for three
seconds; you are then asked if you want to switch off the thermostat.
If you select
YES
standby mode is activated; if you select
NO
(or wait
thirty seconds) the thermostat returns to display mode. To exit standby
mode, press any button. This will return you to display mode.
Now we have gone through everything that is required to go directly to the
operation mode you will use in the thermostat. There, you can read more
about all the functions and how to set them to get the most out of your
thermostat.
INTRODUCTION