16
Date and time
DATE/TIME
A set time and date can be changed if needed, for example, if the electrical supply
to the thermostat was disrupted for a period of more than fifty hours. The setting
function then comes up automatically.
You will find date and time setting in the
MAIN MENU
under
SYSTEM
and
DATE/
TIME
. Change the value that blinks with either
or
and confirm with
.
Summer and winter time
S/W TIME
The thermostat calendar and clock are automatically set to summer and winter time
but the function can, if it is not required, be switched off.
Summer and winter settings are in the
MAIN MENU
under
SYSTEM
; select
S/W
TIME
. Switch off the function under
ON/OFF
in the menu and select
OFF
, a mes-
sage is shown for a short time confirming that the function is switched off. Activate
the function in the opposite way by selecting
ON
.
Sensor settings
SENSOR
The thermostat can regulate temperature in three ways to accommodate both com-
fort temperature and possible temperature requirement for floor material.
The sensor settings are in the
SYSTEM
menu under
SENSOR
, and there select the
sensor you want to use by browsing with
or
and confirm with
.
Adaptive function
ADAPTIVE
The thermostat has a function that calculates when heating should be started to
provide the required temperature at the right time. The function is activated on
delivery, but can be switched off as required.
You will find the settings for adaptive function in the
MAIN MENU
under
SYSTEM
,
and there you select
ADAPTIVE
. Switch off the function under
ON/OFF
in the menu
and select
OFF
, a message is shown for a short time confirming that the function is
switched off. Activate the function in the opposite way by selecting
ON
.
Ventilation mode
VENT
If the room temperature sinks by more than 3 °C in a minute, for example, when
airing, ventilation mode is activated. The thermostat then deactivates heating for
15 minutes, after which it returns to the same setting; ventilation mode shows in
the display when it is activated. The function is activated on delivery, but can be
switched off as required.
You will find the settings for adaptive function in the
MAIN MENU
under
SYSTEM
,
and there you select
ADAPTIVE
. Switch off the function under
ON/OFF
in the menu
and select
OFF
, a message is swhown for a short time confirming that the function
is switched off. Activate the function in the opposite way by selecting
ON
.
FLOOR THERMOSTAT
The most common installation that suits most rooms and needs. A sensor placed in
the floor measures the temperature and regulates the heating.
Note that the sensor measures the temperature below the surface; if the
