EB TECHNOLOGY NOLOGO START-S4XL, Техническое руководство

Страница: 2 / 24

Premises
This manual provides all the specific information you need to fa -
miliarize yourself with and correctly operate your unit. Read it
very carefully when you purchase the instrument and consult it
whenever you have doubts regarding use and before performing
any maintenance operations.
Safety precautions
Using the unit improperly and performing repairs or modifications
personally will void the warranty. Nologo declines any respon-
sibility for damages due to inappropriate use of the product and
due to any use other than the use the product was designed for.
Nologo declines any responsibility for consequential damages
except civil liability for the products.
The gate should be conformed to the european law EN 60204-1,
EN 12445, EN 12453.
It is obliged to be conformed to the norms for the automated
closing devices EN 12453, EN 12445, EN 12978 and eventaully
nationa laws.
The adjust of the force of the motor should be measured with a
device according to the values of the norma EN 12453 .
Environmental protection
measures
Information regarding the environment for custom-
ers within the European Union. European Directive
EC 2002/96 requires that units bearing this symbol
on the unit and/or on the packaging be disposed of
separately from undifferentiated urban wastes.
be disposed of with the ormal household wastes. The owner is
responsible for disposing of this product and other electrical and
electronic equipment through specific waste collection facilities
indicated by the government or local public agencies. Correct
disposal and recycling help prevent any potentially negative
impact on the environment and human health. To receive more
detailed information regarding disposal of your unit, we recom-
mend that you contact the competent public agencies, the waste
collection service or the shop where you purchased the product.
Small legend
OLS Open limit switch
CLS Close limit switch
START Control to drive the gate
PEDESTRIAN in sliding units: control partial opening
Vac Alternate current
Vdc Direct current
NC Normally closed
NO Normally open
Isolated contact Isolated from power supply
START-S4XL Technical manual
-2-
Index
Par. Description Pag.
2 Description of the product 4
2.1 Working features
2.2 Fields of application
2.3 Technical features
3 Premises 5
3.1 Preliminary checks
3.2 Type of electrical wires
3.3 Connections
4 Installation of the control board 6
4.1 Scheme and electrical connections
4.2 Description of the electrical connections 7
4.3 Connection of the network tension 8
4.4 Motor connection
4.5 Connection of the signal light
4.6 Connection of a 24Vdc light
4.7 Connection of Courtesy light 9
4.8 Connection of ANTENNA
4.9 Connection of arrest devices STOP command
4.10 Connection of the LSO and LSC LIMIT SWITCHES
4.11 Connection of the commands START / PEDESTRIAN 10
4.12 Connection of LOCkING
4.13 Power supply of ACCESSORIES
4.14 Connection of the PHOTOCELLS A 11
4.15 Connection of the PHOTOCELLS A with phototest
4.16 Connection of the PHOTOCELLS B 12
4.17 Connection of the PHOTOCELLS B with phototest
4.18 Check of the CONNECTIONS
5 Functions and adjustments 13
5.1 Use of the DIP A
5.2 Setting up with DIP B 14
5.3 Diagram of PEDESTRIAN time and START 15
5.4 Setting up with DIP C
6 Using the remote controls 16
6.1 FULL CANCELLATION of the memory
6.2 Learning of the remote controls
7 Time learning 17
7.1 Time learning: NORMAL WAY
7.2 Time learning: ADVANCED SYSTEM
18
7.3 Time learning PEDESTRIAN WAY 19
7.4 Time learning: pause (fastest way)
7.5 Reset of the memory 20
8 Instruction for TEST
9 LED and adjust of
FORCE, DESPLACEMENT AND SLOWDOWN
21
10 Note 22
11 Declaration of CE conformity 23