6 Operation
6.2 Starting the device
44
MICRO PANEL XV200
10/2011 MN04802007Z-EN
www.eaton.com
6.2
Starting the device
1
Insert the CF card with the operating system:
1.1
Open the CF slot lock mechanism.
1.2
Insert the CF card into the CF slot.
1.3
Close the CF slot lock mechanism.
2
Energize the device.
The device will boot.
3
If the device does not boot up and/or if an error message appears while starting (booting) the
device, see Chapter 7.4 Troubleshooting,
50.
4
Complete the following steps after initial commissioning
(
→
Document «MN05010007Z-EN System Description Windows CE»):
4.1
Adjust the system settings of the device.
4.2
Install the required application programs.
CAUTION
Data loss
During a write operation, the CF card may lose data or may be destroyed if it is re-
moved or if there is a power failure.
Only insert the CF card when the device is in a de-energized state.
Always secure CF cards with the CF slot lock mechanism.
Avoid write operations to CF cards. Reasons:
-
The number of write cycles possible on CF cards is limited.
-
A power failure during write operations will most likely lead to loss of data.
Only remove the CF card when the device is in a de-energized state.
Before switching off, ensure that no software write operations to the CF card are
in progress.
Fig. 22 Service side of the device
Do not apply any force (CF cards are protected against reverse insertion).
The lifespan of the backlight can be increased by reducing the brightness (
→
Document
«MN05010007Z-EN System Description Windows CE»).
Содержание XV200
