manualshive.com logo in svg

Eaton XC-152 Series, Руководство пользователя, Страница: 26 / 86

Поделиться
Скачать
Eaton XC-152 Series Скачать руководство пользователя страница 26

2 Safety regulations

2.3 Device-specific hazards

22

Compact PLC XC-152

    05/17 MN050001ZU EN    www.eaton.com

CAUTION 

SHORT-CIRCUIT HAZARD

If the device is or has been exposed to environmental fluctua-
tions (ambient temperature, air humidity), condensation may 
form on or inside it. As long as this condensation is present, 
there will be a short-circuit hazard.

Do not switch on the device when it has condensation in or on 
it.

If the device has condensation in or on it, or if the panel has 
been exposed to environmental fluctuations, let the panel settle 
into the existing ambient temperature before switching it on. Do 
not expose the device to direct thermal radiation from heating 
appliances.

CAUTION 

UV LIGHT

Plastics will become brittle when exposed to UV light. 

This artificial aging will reduce the device's lifespan. Protect the 
device from direct sunlight and other sources of UV radiation.

CAUTION 

POINTY, SHARP OBJECTS AND CORROSIVE LIQUIDS

Do not use any pointy or sharp objects (e.g., knives)

for cleaning. Do not use aggressive or abrasive cleaning prod-
ucts or solvents.

Make sure that no liquids get into the device (short-circuit haz-
ard) and that the device is not damaged in any way.

CAUTION

When using commercially available peripheral devices (e.g., 
with the USB port), it is important to keep in mind that their 
EMC interference immunity parameters may render them 
unsuitable for use in industrial environments.

The USB ports (USB host and USB device) on the device unit 
are meant for maintenance work only.

Содержание XC-152 Series























































































Отзывы:

Нет отзывов