Eaton XC-152 Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 86

Eaton XC-152 Series Скачать руководство пользователя страница 14

1 Description

1.2 Intended use

10

Compact PLC XC-152

05/17 MN050001ZU EN www.eaton.com

1.1.3 SWD coordinator special feature

XC-152-E... devices featuring the optional SmartWire-DT interface can be
used as SWD coordinators for Lean Automation.

1.2 Intended use

XC-152 compact PLCs are used primarily in machine and system building
applications. They are intended exclusively for operating and controlling
machines and systems.



The device is designed to be flush mounted in control cabinets, control pan-
els, or control consoles.

Any other use must be discussed and agreed upon with the manufacturer in
advance.

XC-152 compact PLCs are approved for use in closed spaces.

￫

SmartWire-DT can prove to be invaluable when implementing
Eaton's Lean Automation concept, which, as part of the com-
pany's Lean Solution approach, offers several significant advan-
tages. More specifically, SmartWire-DT integrates the I/O level
directly into the switchgear being used, enabling a PLC to use
SmartWire-DT to directly access digital and analog data from
control circuit devices all the way to circuit-breakers. This elimi-
nates the need for a separate gateway and I/O layer, reducing
the number of components and engineering work and enabling
users to create flexible, yet streamlined automation solutions.
Eaton calls this concept Lean Automation, and uses it to provide
users in the machine building and plant engineering industries
with unparalleled freedom so that they can design creative and
profitable solutions.



WARNING

The XC-152 must be used only in locations for which the XC-152 is approved.
Make sure to read and follow the information and labels on the nameplate, as
well as section Approvals and declarations in the appendix.



WARNING

It is strictly prohibited to use the XC-152 in order to implement safety-relevant
functions (in the sense of personal and machine protection).

«
...
12
13
14
15
16
...
»

Содержание XC-152 Series























































































Отзывы:

Нет отзывов