Eaton UltraShift PLUS FO(M) E310C-LAS Series, Инструкция по эксплуатации

Страница: 33 / 44

28
Operation
• The transmission will exit Neutral Coast Mode and reengage an
appropriate gear under any of the following conditions:
- Vehicle brakes are applied
- Driver depresses accelerator pedal
- Cruise control is canceled
- A mode other than Drive is selected
- Cruise high or low set speeds are exceeded
- Maximum vehicle grade is exceeded
- Request by an adaptive cruise system
• Various brand names may be used for Neutral Coast systems.
Automated Lube Schedule
• The heavy-duty UltraShift PLUS has an optional prognostic feature
that notifies the operator when the Clutch Release Bearing needs
greasing.
• At the appropriate grease interval and shortly after each engine start,
“GI” will momentarily appear in the gear display, along with an audi-
ble tone. This will continue to occur at each engine start until clutch
service has been completed.
• The operator can choose to follow this Automated Lube Schedule or
the published lube guidelines in the Lubrication Manual TCMT0021.
Note: “GI” stands for grease interval and may be misread as “G1” on gear dis-
play.