Eaton UltraShift PLUS FO(M) E310C-LAS Series, Инструкция по эксплуатации

Страница: 32 / 44

27
Operation
Load Based Shifting
• The transmission system will adapt to the conditions of the vehicle to
change the shift points based on the followings inputs:
•
Vehicle grade
• Engine RPM
• Throttle position
• Vehicle load
• After changing loads or powering up the transmission system needs
to relearn these inputs for the first few shifts to make the proper
adjustments.
Coast Mode
• When coasting to a stop on level terrain the transmission system
may not downshift into the lower gears. It will select a gear after the
throttle is reapplied.
Cruise Control
• This transmission system is compatible with cruise control.
Neutral Coast Mode
If equipped and enabled, Neutral Coast Mode allows the transmission to dis-
engage the driveline by pulling out of gear on slight downhill grades, where
little to no engine power is required, when the vehicle is in cruise control and
the transmission is in Drive Mode.
• When Neutral Coast Mode is active, the engine will drop to idle speed
and the transmission will disengage.
• The gear display may flash a gear number or indicate Neutral when
Neutral Coast Mode is active, depending upon specific OEM imple-
mentation.
• If a flashing number is indicated in the gear display, this represents
the gear that the transmission will select when it is necessary to
engage a gear.