Eaton TFX CAN link mobile 3311 Variant Скачать руководство пользователя

Страница: 12 / 60

Functionality and features

EATON TFX INSTALLATION AND OPERATION MANUAL

6046279-001

September 2019

www.eaton.com

NOTICE

Loss of FCC certification possible.

Only use antennas with a maximum gain of:

TFX External Antenna

3.4 dBi (850 MHz)

1.5 dBi (1900 MHz).

Changes or modifications to the device not expressly

approved by the manufacturer can void the user’s authority

to operate the device under FCC rules.

2.4 Warranty and liability

In order to consistently bring you the highest quality, full

featured products, we reserve the right to change our

specifications and designs at any time.
A limited warranty is given with these Eaton products.

Please see our website for details.
http://www.eaton.com/Eaton/ProductsServices/Hydraulics/

WarrantyTermsConditions/PCT_612027

3.0 Functionality and features

This chapter contains Information on device functionality

and features. It describes in detail the operating modes,

connectors, cables, pin assignments, interfaces, and

indicator elements.

3.1 Functions

Table 5: Listed functions for TFX models

Function

TFX Internal

Antenna

TFX External

Antenna

CAN-CAN-Bluetooth / WLAN bridge

CAN-Bluetooth/WLAN interface

Battery

Antenna (internal / external)

int.

ext.

Mobile radio (3G/4G)

Real-time mode

Yes

Logging mode

Yes

Input/output functions

Yes

Acceleration sensor

Yes

Gyro sensor

Yes

CAN connectors

GNSS

Yes

eSIM card

Yes

3.1.1 Real-time mode

In real-time mode, CAN messages are

transmitted bidirectionally.
With the device, you can use CAN interfaces to transmit

process data such as machine parameters during ongoing

operations to the Data platform. Depending on the device

features, you can transmit data from the GNSS receiver and

the input/output functions and pass them on via the CAN

bus.
Data is transmitted constantly and can be evaluated in

close to real-time. This function requires a permanent link

between the device and the user software or the Data

platform.

3.1.2 Logging mode

In logging mode, the device logs CAN messages, GNSS

data, and internal variables such as the values of the

acceleration or gyro sensors. All logged data is saved to an

internal, nonvolatile memory and sent to the Data platform.
With the device, you can log process data such as machine

parameters during ongoing operation via CAN interfaces.

Depending on the device features, you can process data

from the GNSS receiver and the input/output functions and

send and log them via the CAN bus.

3.1.3 Input/output functions (I/O)

The device features additional input/output functions (3

analog inputs, 1 digital output). You can use the input

function for instance to log status information from devices

or machines as well as to directly determine and monitor

Содержание TFX CAN link mobile 3311 Variant





























































Результаты поиска

Содержание TFX CAN link mobile 3311 Variant

Отзывы:

Похожие инструкции для TFX CAN link mobile 3311 Variant

Бренды по названию

Популярные бренды

Eaton TFX CAN link mobile 3311 Variant, Инструкция по установке и эксплуатации

Результаты поиска

Содержание TFX CAN link mobile 3311 Variant

Отзывы:

Похожие инструкции для TFX CAN link mobile 3311 Variant

Бренды по названию

Популярные бренды