Eaton PRS0100001, Руководство пользователя

Страница: 31 / 43

Operating Instructions
31
2. Drain oil completely. Be sure to include oil in system piping, cooler and air/oil separator tank. Close drain valve.
3. Remember to remove and change oil filter, taking care to avoid hot oil during replacement.
4. Open oil fill port and add new oil.
Inspect belt tension after first 30 hours of operation then at every 1,000 hours.
1. Check belt tension on each individual belt in the center of each pulley, and should have ¼”deflection up and ¼”
deflection down, for ½” total.
2. Always replace all belts with the same brand, at the same time. Make sure belts are unimatched. Do not
replace belts independently.
3. Do not splash lubricating oil on belts or pulleys when adjusting or replacing belts.
Belts
DO NOT OVERFILL. Residual oil may still be in the
compressor. The above capacities can be used for
guidelines, but use the upper arrow fill line on the
sight glass (See page 7). Over filling causes oil to
blowout the inlet valve and through the air filter, also
oil could push past the separation system resulting
in oil in the air lines.
Oil Capacities:
7.5– 10 HP – 5 liters (1 gal/2.5 pints)
15 – 20 HP – 6 liters (1 gal/4.6 pints)
25 – 30 HP – 11 liters (2 gal/7.25 pints)
40 – 60 HP – 20 liters (5 gal/2.25 pints)
75 – 100 HP – 30 liters (7 gal/7.4 pints)
125 – 150 HP – 70 liters (18 gal/4 pints)
175 – 200 HP – 80 liters (21 gal/1 pint)
CAUTION
Failure to perform regular oil changes may cause equipment damage and
will void warranty. Oil must be changed annually regardless of hours used.
NOTICE
NOTICE
To avoid serious personal injury, be sure to relieve all system pressure
then lock out power and tag compressor to prevent unexpected
movement of the unit.
WARNING
Use only genuine Airbase Industries Rotary Screw Oil, SKU OIL003. For
food manufacturing applications, use Airbase Industries Rotary Screw Oil
SKU OIL001. Use of any other product may cause product damage and
void the warranty. Refer to warranty statement for oil requirements.