Eaton PRS0100001, Руководство пользователя

Страница: 26 / 43

Eaton Compressor Rotary Screw Compressor
26
Refrigerated Dryer/Coalescing Filter 17
(optional, not shown) The refrigerated dryer removes moisture content. The coalescing filter removes oil droplets and
impurities in the compressed air. The refrigerated dyer/coalescing filter operates best with an automatic drain that
removes water condensation collected during the airdrying process.
Operation
Safety Rules
1. Make sure all operators receive product training, read and understand all instructions.
2. NEVER allow modifications to compressor structure or controls.
3. Keep all ignition sources away from exposed live electrical parts.
4. Keep all persons clear of compressor during start-up and operation.
5. NEVER operate the compressor with the fan, coupling or other guards removed or with access doors open.
6. DO NOT engage in horseplay with air hoses as death or serious injury may result.
7. Provide adequate ventilation and use proper lubricant while operating the compressor. Clean-up immediately
any spilled lubricant or other combustible substances.
8. Shut off compressor and allow it to cool before checking or adding lubricant, or when refilling air line anti-
icer systems with antifreeze compound. Keep sparks, flames and other ignition sources away and DO NOT
permit smoking in the area.
9. Stop compressor and disconnect power if a hazardous condition arises.
10. Wear snug fitting clothing and confine long hair when around compressor. Keep all body parts and
clothing away from couplings, fans and other moving parts of the equipment.
11. Keep hands, feet, floor controls and walking surfaces clean and dry.
WARNING
To avoid fires, keep all flammable, combustible, poisonous and
noxious materials away from operating area. Make sure there are
no oily rags, trash, leaves, litter or other combustible materials in
operating area. Keep suitable, fully charged fire extinguishers nearby
when servicing and operating the compressor.
This unit can automatically start! Before attempting any repairs or
adjustments, disconnect, lock out and verify all power is off to all
circuits to minimize the possibility of accidental startup or operation.
This is especially important for remotely controlled compressors.
Serious injury could result.
WARNING