background image

Operating Instructions

5

This manual contains very important information on SAFETY and how to PREVENT EQUIPMENT PROBLEMS. The 
following will help in understanding this information:

DANGER 

indicates an imminently hazardous situation which, if not avoided, will result 

in death or serious injury.

WARNING

 indicates a potentially hazardous situation which, if not avoided, could 

result in death or serious injury.

CAUTION

 indicates a potentially hazardous situation, which if not avoided, may

result in minor or moderate injury.

NOTICE

 indicates important information that if not followed, may cause damage to 

equipment.

Read all manuals included with this product carefully. Be thoroughly 
familiar with the controls and the proper use of the equipment.

DANGER

WARNING

CAUTION

NOTICE

Safety

Eaton Compressor Rotary Screw Systems: 75 Hp - 200 Hp (VSD Compliant)

Model No.

PRS0750003

PRS1000003

PRS1250003

PRS1500003

PRS1750003

PRS2000003

Description

Three Phase
Dual Voltage

Three Phase
Dual Voltage

Three Phase
Dual Voltage

Three Phase
Dual Voltage

Three Phase
Dual Voltage

Three Phase
Dual Voltage

Motor

75HP

100HP

125HP

150HP

175HP

200HP    

Amp Draw

230V:180

460V: 90

230V:240

460V: 120

230V: 300 
460V: 150

230V: 360
460V: 180

230V: 420

460V: 210

230V: 480

460V: 240

RPM

1750

1750

1750

1750

1750

1750

Voltage

208/230/460

208/230/460

208/230/460

208/230/460

208/230/460

208/230/460

SCFM @ 100 
PSI

353

424

570

706

812

883

Start Type

Y-Delta & VSD

Y-Delta & VSD

Y-Delta & VSD

Y-Delta & VSD

Y-Delta & VSD

Y-Delta & VSD

Drive Type

Direct Drive

Direct Drive

Direct Drive

Direct Drive

Direct Drive

Direct Drive

Air End Model

E25G

E25G

AA-1030R

E75G

E75G

E75G

Noise DB(a)

78

80

83

83

87

87

Outlet Size

NPT 2”

NPT 2”

NPT 3”

NPT 3”

NPT 3-1/2”

NPT 3-1/2”

Oil Capacity 

8 gal. (30 L)

8 gal. (30 L)

18 gal. (70 L)

18 gal. (70 L)

21 gal. (80 L)

21 gal. (80 L)

Dimensions

56”x85”x72”

56”x85”x72”

63”x104”x75”

63”x104”x75”

68”x105”x78”

68”x105”x78”

Weight (lbs.)

3496

3496

5806

5806

6538

6538

L•W•H 

(inches)

Содержание PRS0100001












































Отзывы: