Eaton PRS0100001, Руководство пользователя

Страница: 7 / 43

Operating Instructions
7
A forklift may be necessary for unloading the Eaton Compressor. and requires a certified forklift operator, using all
forklift safety measures. Refer to figure 1 for safe unloading procedures.
Do not operate unit if damaged during shipping, handling or use.
Bursting may result, causing injury or property damage.
Remove shipping brackets from each corner of mounting base before
operating compressor. Refer to Figure 2.
Make sure pallet-mounted compressors are firmly secured to the
pallet before moving. NEVER attempt to move a compressor that is
not secure as serious injury or property damage could occur.
Prior to using the compressor, check for external damage that might have occurred during transit.
WARNING
1. Be sure load is secure and well balanced before moving
compressor.
2. Make sure forks are fully engaged and tipped back before
lifting or moving compressor.
3. Keep load as low as possible and observe safe operating
practices.
1. Carefully inspect all lifting equipment and make sure it is in good
condition. Rated capacity should exceed compressor weight. The
lifting hook has a functional safety latch or equivalent and is
properly attached to lifting feature.
2. Make sure lifting points are in good condition and tighten any loose
nuts or bolts before lifting.
3. Use provided lifting feature or appropriate sling. A sling must be
used when moving compressor with a helicopter or other air borne
equipment. Be sure to follow OSHA standards 29 CFR 1910
Subpart N.
4. Use guide ropes or equivalent to prevent twisting or swinging of the compressor while it is in the air and
NEVER attempt to lift in high winds. Keep compressor as low to the ground as possible.
5. Keep persons away and make sure no one is under the compressor while it is lifted.
6. Only use lifting features provided for entire compressor package.
NEVER
use bolts or other hooks on
invididual components to move the compressor.
7. Put compressor on level surface that can support the weight of the compressor and loading equipment.
Forklift Safety
LIFTING SAFETY
Inspection
WARNING
NOTICE