manualshive.com logo in svg

Eaton Powerware 9140, Руководство пользователя

Поделиться
Скачать
Eaton Powerware 9140 Скачать руководство пользователя страница 27

Eaton 9140 UPS (7.5–10 kVA) User's Guide  

S

  164201622 Rev 3

 www.eaton.com/powerquality

21

Chapter 3

Installation

This section explains:

S

Equipment inspection

S

Unpacking the cabinet

S

Extended Battery Module (EBM) setup and installation, including
EBM batteries

S

UPS setup and installation, including UPS internal batteries

S

Remote emergency power-off (REPO) or remote on/off (ROO)
installation

Inspecting the Equipment

If any equipment has been damaged during shipment, keep the shipping
cartons and packing materials for the carrier or place of purchase and file
a claim for shipping damage. If you discover damage after acceptance,
file a claim for concealed damage.

To file a claim for shipping damage or concealed damage:  1) File with
the carrier within 15 days of receipt of the equipment; 2) Send a copy of
the damage claim within 15 days to your service representative.

NOTE  

Check the battery recharge date on the shipping carton label. If the date has expired

and the batteries were never recharged, do not use the UPS. Contact your service
representative.

Содержание Powerware 9140















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды