Eaton Power Xpert 9395 550/275, Инструкция по установке и эксплуатации

Страница: 201 / 208

UPS Maintenance
Power Xpert
TM
9395 550/275 UPS (225–550 kVA) Installation and Operation Manual 164201716—Rev 8 www.eaton.com/powerquality 9-5
9.3 Installing Batteries
Install batteries in accordance with the battery and battery cabinet or battery rack manufacturer's instructions.
9.4 Recycling the Used Battery or UPS
Contact your local recycling or hazardous waste center for information on proper disposal of the used battery
or UPS.
WARNING
l
Do not dispose of the battery or batteries in a fire. Batteries may explode. Proper disposal of batteries
is required. Refer to your local codes for disposal requirements.
l
Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin and eyes.
It may be toxic.
l
A battery can cause electrical shock, burn from high short–circuit current, or fire. Observe proper
precautions.
ATTENTION!
l
Une batterie peut prêsenter un risque de choc êlectrique, de brulure, ou d'incendie. Suivre les
précautions qui s'imposent.
l
Pour le remplacement, utiliser le même nombre et modéle des batteries.
l
L'élimination des batteries est règlementée. Consulter les codes locaux à cet effet.
CAUTION
Do not discard the UPS or the UPS batteries in the trash. This product contains sealed, lead–acid
batteries and must be disposed of properly. For more information, contact your local recycling/reuse or
hazardous waste center.
CAUTION
Do not discard waste electrical or electronic equipment (WEEE) in the trash. For proper disposal, contact
your local recycling/reuse or hazardous waste center.
9.5 Maintenance Training
A basic training course, available from Eaton Corporation, gives you a competent working knowledge of the
UPS system operation and teaches you how to perform first level corrective maintenance. For more
information about training and other services, contact the Help Desk (see paragraph 1.8).
NOTE There is no manual DC disconnect device within the UPS.