Eaton PDI WaveStar, Руководство по установке и эксплуатации

Страница: 14 / 68

4 Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01
22..33 S Sccrreeeenn S Suum mm maarryy aanndd N Naavviiggaattiioonn
Figure 2. Screen Summary and Navigation
Date/Time
Alarm summaries are
given on each page.
• The main navigation buttons are present on each screen.
• Touch a button to select that screen.
• Button turns blue wh en selected.
SOFTWARE
VERSIONS button is
only displayed on the
HOME screen.
Banner, user specified on SETUP screen
Setup and configuration information for the Color Monitor are on these screens:
• SETUP : system parameters, such as number of devices in Monitor’s chain
• Device SETTINGS : Device-specific parameters, such as user-specified device name (DEVICES —>Device
Name —>SETTINGS)
• SOFTWARE VERSIONS: a list of software versions for each device, accessible only from the HOME
screen.
• DEVICES screen gives a list of all devices in the Monitor’s chain.
• SETTINGS screen lets you set device name and parameters specific to the device.
Setpoints in the device’s points list, such as breaker alarm thresholds, are not viewable or modifiable on the
Monitor.
Power monitoring information as it is stored in each device’s points list (or Modbus register map) is in each
DEVICE READINGS screen.
Alarms and warnings are displayed on these screens:
• ALARM: List of all extant warnings and alarms by device name
Introduction