Eaton PDI WaveStar, Руководство по установке и эксплуатации

Страница: 20 / 68

10 Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01
33..44 EEtthheerrnneett C Caabblleess
The maximum length of Ethernet cable depends upon the customer’s choice of Ethernet cable.
33..55 C Cuussttoom meerr M Mooddbbuuss R RTTU U C Coonnnneeccttiioonnss
When a Color Monitor is embedded in a Eaton product (PDU, RPP, or JCOMM), the customer does not
typically wire Modbus RTU directly to the Monitor. Downstream Modbus RTU links are typically to internal
devices and are wired at the factory. The upstream Modbus RTU link is extended from the Monitor to a
customer connection port, which differs by unit.
33..55..11 P Poow weerr D Diissttrriibbuuttiioonn U Unniitt ((P PD DU U))
On Eaton PDUs, customers make Modbus RTU connections to the PDU’s Contractor Board. Basic and
Enhanced Contractor Boards are shown in
Figure 6 and, Figure 7 .
Figure 6. Modbus RTU Connections: PDU Basic Contractor Board
Color Monitor Networking