Eaton PDI WaveStar, Руководство по установке и эксплуатации

Страница: 13 / 68

Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01 3
C Chhaapptteerr 22 IInnttrroodduuccttiioonn
22..11 W WaavveeS Sttaarr C Coolloorr M Moonniittoorr S Suum mm maarryy
The Eaton ® PDI WaveStar ® Color Monitor is a 7-inch color touchscreen which displays power management
information for up to twenty (20) Branch Circuit Monitoring System (BCMS) devices and other Eaton devices in
the Monitor’s downstream Modbus network.
The Color Monitor is incorporated into Eaton products, such as Power Distribution Units (PDUs), Remote
Power Panels (RPPs), or JCOMM
® s, and can also function as a stand-alone power monitoring station.
Figure 1 shows the Monitor used in a JCOMM.
Figure 1. WaveStar Color Monitor Installed in a JCOMM
NOTE The term PDI in this manual refers to products previous manufactured by Power
Distribution, Inc. All service and support for these features are now supplied by Eaton.
22..22 P Poow weerr O Onn aanndd A Acccceessss
The Color Monitor does not have an on/off switch. The Monitor automatically powers-on whenever power is
applied to the unit in which it is installed.
When the unit is powered on for the first time, the Home Screen appears (see Figure 2 ).
The Color Monitor is accessed by touching the screen. If the unit is powered up and is not touched for 15
minutes, the backlight will turn off to save power. The backlight turns back on when the operator again touches
the screen, showing the last displayed screen.