Eaton PDI WaveStar, Руководство по установке и эксплуатации

Страница: 61 / 68

Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01 51
C Chhaapptteerr 99 G Glloossssaarryy
BCMS
Branch Circuit Monitoring System.
BCMS CB
Small points for measuring current in RPP subfeeds with CTs. When used, it has its own Modbus
address, but its description or mapping is contained in the BCMS Normal and BCMS KWH points
lists.
BCMS device
Power distribution elements monitored by a single points list (or Modbus register map) and
addressed by a single Modbus address. Example: a panelboard is a BCMS device because it is
monitored with one points list and has one Modbus address. An acquisition board can monitor
three BCMS devices—two panelboards and one set of sub-distribution feeds.
BCMS ESF
Enhanced Subfeeds Points list for large PDU subfeeds (e.g., 250A).
BCMS IEC
BCMS points list for IEC format panelboards with 36 or 72 1P circuits.
BCMS KWH
Points list specialized for power measurement at the individual circuit level. Warnings and alarms
thresholds are set the same for all panelboard circuits.
BCMS Normal
Standard points list allowing individual circuits to be customized for warning and alarm thresholds.
KWH measurements are available at the panelboard level.
BMS
Building management system.
M4G
Points list for a PDU M4G data acquisition board and associated contractor board.
Modbus RTU
An industrial communications protocol.
Modbus TCP/IP
Modbus protocol send over TCP/IP, which provides higher transmission speeds.
Points List
Modbus register map.
PDU
Power Distribution Unit.
RPP
Remote Power Panel.
SNMP
Simple Network Management Protocol.