
ONGUARD
COMMAND CONSOLE INSTALLATION MANUAL
www.eaton.com/onguard
2
Table of Contents
SECTION I
GENERAL INFORMATION
About this guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
2
Contact information � � � � � � � � � � � � � � � � � � � � � � � � � �
2
Before you begin � � � � � � � � � � � � � � � � � � � � � � � � � � � �
3
Safety warnings and precautions � � � � � � � � � � � � �
3-4
Console capacities � � � � � � � � � � � � � � � � � � � � � � � � � �
4
Console environment � � � � � � � � � � � � � � � � � � � � � � � �
4
SECTION II
PREPARING TO ASSEMBLE THE CONSOLE
Tools required � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
5
Personal protective equipment recommended � � � � �
5
OnGuard command console components � � � � � � � �
5
Main console components � � � � � � � � � � � � � � � � � �
5
Assembly hardware � � � � � � � � � � � � � � � � � � � � � � � �
6
SECTION III
ASSEMBLING THE CONSOLE
Assemble the base cabinets � � � � � � � � � � � � � � � � � � �
7
Assemble the worksurface support frames � � � � � � �
8
Install and connect the lift motor components � �
9-11
Initialize the lift motor systems � � � � � � � � � � � � � � � �
11
Install the worksurface � � � � � � � � � � � � � � � � � � �
12-14
Install the TechCurb
™
� � � � � � � � � � � � � � � � � � � � �
15-16
Install the rear corner covers � � � � � � � � � � � � � � � � � �
16
SECTION IV
ACCESSORIES
TechTrack
™
components � � � � � � � � � � � � � � � � � � � � �
17
Monitor poles � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
18
Personal environment system � � � � � � � � � � � � � � � � �
19
Task light bracket � � � � � � � � � � � � � � � � � � � � � � � � � � �
20
SECTION V
CONSOLE ELECTRICAL CONNECTIONS
Grounding and bonding the console � � � � � � � � � � � �
21
Plugging the console In � � � � � � � � � � � � � � � � � � � � � �
21
SECTION VI
SETTING UP AND USING THE CONSOLE
Cabling the console � � � � � � � � � � � � � � � � � � � � � � � � �
22
Operating the height adjustable worksurface � � � � �
22
Using the personal environment system � � � � � � � �
23
SECTION VII
USER MAINTENANCE INSTRUCTIONS
Care and cleaning � � � � � � � � � � � � � � � � � � � � � � � � � �
24
About this Guide
This document is intended to help provide direction on
the unpacking and basic assembly of Eaton’s OnGuard
Command Console System and it’s configurable
accessories� Additional copies of this manual are available
at: www�Eaton�com/onguard
Intended Audience
This document is intended for personnel experienced at
installing console equipment in a control center facility�
Technical Support
If you encounter any problems with this installation,
send an email and detailed description of the problem,
as well as contact information, to Technical Support at:
ToSupportESWorcesterMA@eaton�com
Document History
The following table shows this document’s revision history:
February, 2017
First Publication – Pub No� IB210002EN
Sales Representative and Contact Information
Contact your Eaton Sales representative using one of the
methods below:
Phone
Call us toll free at 800-225-7348 (US Only)
or 508-852-4300
Eaton
160 Gold Star Boulevard
Worcester, MA 01606
InfoESWorcesterMA@Eaton�com
Web
Visit us at www�eaton�com/onguard and click on
“Contact Us�” Simply complete and submit the
form as directed on our website�
SECTION I
OnGuard Command Console
Installation Manual
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY
The information, recommendations, descriptions and safety notations in this document are based on Eaton Corporation’s
(“Eaton”) experience and judgment and may not cover all contingencies� If further information is required, an Eaton sales
office should be consulted� Sale of the product shown in this literature is subject to the terms and conditions outlined in
appropriate Eaton selling policies or other contractual agreement between Eaton and the purchaser�
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES
OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY
EXISTING CONTRACT BETWEEN THE PARTIES� ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON� THE
CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES�
In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or other-
wise for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to damage or
loss of use of equipment, plant or power system, cost of capital, loss of power, additional expenses in the use of existing
power facilities, or claims against the purchaser or user by its customers resulting from the use of the information, recom-
mendations and descriptions contained herein� The information contained in this manual is subject to change without notice�