Eaton’s Crouse-Hinds Business
Cooper Crouse-Hinds Pte Ltd
No. 2 Serangoon North Ave 5 #06-01
Singapore 554911
tel: + 65 6645 9888
fax: +65 6297 4819
Page 10
(4)
Application Area
After selecting a certain tab / tree node combination in the Navigation area, the
corresponding parameters will be displayed in the area to the right known as the
Application Area.
(5)
Action Area
Towards the bottom of the page is the Action Area, which has several buttons with the
following functions:
o
Apply - Apply the changes made by the user. In online mode, DTM will write
any modified parameters into the F809F module. In offline mode, DTM will
only cache the modified parameters.
o
Apply & Close - Same as "Apply" button, then closes the user interface.
o
Cancel - Discards any change made by the user and closes the user interface.
o
Next - Selects the next node at the same level in the navigation tree.
o
Back - Selects the previous node at the same level in the navigation tree.
o
Go to Device - Selects the first device node under the current segment. This is
applicable only when any segment node or device node is selected.
o
Go to Segment - Selects the parent segment node of a device. This is
applicable only when any segment node or device node is selected.
o
Help - Opens online help file.
(6)
Status Area
At the bottom of the window is the Status Bar which displays various DTM system
messages and icons.
1.
Connected / Disconnected
Indicates whether the connection to the F809F module is established
or not
.
