Eaton MTL F809F-Plus, Руководство пользователя

Страница: 32 / 64

Eaton’s Crouse-Hinds Business
Cooper Crouse-Hinds Pte Ltd
No. 2 Serangoon North Ave 5 #06-01
Singapore 554911
tel: + 65 6645 9888
fax: +65 6297 4819
Page 32

respective F809F transducer block. Note that these parameters are normally set by
the DCS system. Do not change any setting unless you are familiar with their meaning.
For more information on these parameters, consult your system vendor or the fieldbus
specification.

Monitoring status
Tells you whether the segment is currently monitored or not. This setting is performed
6.4.2.

Segment tag
This is to enter the tag name of the segment. Default is blank.

Segment voltage
The output voltage of the fieldbus power supply to the segment.

LAS tag
This is to enter the tag of the Link Active Scheduler on the network segment. Default
is blank.

LAS address
Address of the Link Active Scheduler on the network segment.

LAS signal level
Peak-to-peak signal level of the Link Active Scheduler transmissions on the network
segment.

Lowest signal level tag
Tag of the device on the network segment with the lowest detected signal level (if
set).

Lowest signal level address
Address of the device on the network segment with the lowest detected signal level.

Lowest signal level
The lowest detected signal level at which a device transmitted during the last hour.