Eaton MGR10, Руководство по эксплуатации

Страница: 29 / 108

MGR10 A/B/C - Revision : I (for 7.0 software revision) 29

Or press on [Man] to enter manually the compensation temperature .This mode request to the
operator to enter the ambiance temperature .

Press on [Chg] to modify the temperature value

Use the keypad to enter the new value in °C or °F

Press on [ OK ] to enter the new value

Press again on [ OK ] to go back to the previous page

Press on
[Cu]
to select compensation for copper material with a coefficient : 3980 ppm/

C

Or press on [Al] to select compensation for aluminum material with a coefficient : 4100 ppm/

C

Or press on [User] to select a coefficient which can be defined by the operator

Press on [Chg] to modify the coefficient value in ppm/°C

Use the keyboard to enter the new coefficient value

Press on [ OK ] to enter the new value

Press again on [ OK ] to go back to the previous page

Press again on [ OK ] to go back to the previous page
Ref :

Press on [Ref] to select the reference temperature value (standard and initial value set to 20°C)

Press on [UP arrow] or [DOWN arrow] keys to modify the temperature value

Press on [ OK ] to enter the new value

Press again on [ OK ] to go back to the previous page
On :

Press on [On] to activate the temperature compensation mode
Off :

Or press on [Off] to cancel the temperature compensation mode

Press on [Quit] to escape the menu