i-on40 & i-onEX Range
3. Setting and Unsetting
Page 25
Timed Exit:
a.
The keypad sounds the exit tone
(a continuous tone). The top line
of the display shows the part of
the system being set, the bottom
line shows the remaining exit time
(in seconds).
If you hear an interrupted tone
then there is a fault, for example
an active detector.
b.
Leave by the designated exit door.
Remember
to close the door.
At the end of the exit time the
system sets.
(If your system is programmed for
silent set then the keypads remain
silent unless a fault, such as an
open door, is present.)
Exit Terminate Button:
a.
The keypad sounds the exit tone.
The top line of the display shows
the part of the system being set,
the bottom line shows
“Exit
Terminate”.
b.
Leave by the designated exit door.
Remember to
close the door.
c.
Press the Exit Terminate Button.
The system sets.
