4. Administration
i-on40 & i-onEX Range
Page 44
13. Press
to change a
“Yes” to a
“No” or back again.
See page 4 for a description of
partitions. See Note below for a
quick way of assigning users to
partitions.
14. Press
when you have finished
assigning the user to their
partitions.
The keypad gives a double “beep”
confirmation tone.
Note: By default new users belong to all partitions. If you wish to delete a
User from all partitions then:
a)
Press
or
to scroll through the list of partitions until the bottom
line of the display shows “All Partitions” (hint, it’s between Partition 1
and Partition 20 on the i-on160EX, Partition 1 and Partition 4 on the i-
on30EX and i-on40, and between Partition 1 and Partition 5 on the i-
on50EX).
b)
Press
to change the “Yes” to a “No” (or back again).
c)
Press
to confirm your choice.
If you selected No then the control unit removes the user from all
partitions. You must select at least one partition. If you press
to
scroll down you choose individual partitions. Alternatively, repeat
steps a) to c) and select Yes so that the control unit assigns the user
to all partitions.
Access Code
No user can change any other user
’s access code. (A Master User or
Admin User can create an access code for a new user when they first add
the user to the system, see page 52.) Any user, except a Guard or Set Only
user, can change their own code as follows:
1.
Make sure the display shows the
standby screen.
2.
Press .
3.
Key in your access code (or
present a tag).
