Eaton i-onEX Series, Руководство администратора и пользователя

Страница: 108 / 116

4. Administration i-on40 & i-onEX Range
Page 102
Once you have carried out this process, then a user with a Fob-2W-4B can
start a HUA by pressing any two diagonally opposite buttons on their fob at
the same time. Users with a 727r remote control must press the top and
bottom buttons (A and ) at the same time.
Starting a Call To Downloader
Note: This option is available only if you have the appropriate
communicator module fitted inside the control unit and it has been
programmed by the installer. You can use the About menu to check
if you have a communication module fitted, see page 106.
Your installer may be using a personal computer connected to the
telephone network (PSTN) in order to program your alarm system. The
software the Installer uses to program your alarm system is called
Downloader.
There may be times when your Installer asks you to make your alarm
system start a telephone call out to the installer's Downloader. Your alarm
system is programmed to call up to two different telephone numbers. You
do not have to know these numbers, your Installer will tell you to select one
of them.
To start the call:
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press

until you see:.


5. Press

.


6. Press

until the display shows:


7. Press

.


8. Press

until the display shows
Telephone Number 1 or 2, or IP
Address 1 or 2 as instructed by
your installer.

