![background image](http://html1.mh-extra.com/html/eaton/ec500/ec500_operation-handbook_3906325015.webp)
EC500 Controller Handbook
Copyright © 2019 Eaton Corporation. All Rights Reserved.
Issue A March 2019
Page 15 of 107
For example, if a user wants to change Battery Capacity then go to
Home
Main Menu
Settings
Battery Settings
General Settings
Battery Capacity
and press Enter. If User is not already logged in, a
pop-up window for PIN entry will appear.
DISPLAY SETTINGS
In Display Settings, a user can set brightness level.
➢
To set Brightness level
•
Home
Main Menu
Settings
System Settings
Brightness
.
•
Change level (10%
–
100%) using up and down keys.
•
Enter to save
.
Adjust display intensity according to ambient light, else you may not be able to see the
display values
DISPLAY TIME-OUT
If there is no keypad activity for 60 seconds, the display will jump back to the Home screen.
When the display is at Home screen and there is no user activity for 60 seconds, the display intensity
automatically reduces to half (minimum 10%). If there is no activity for further 180 seconds then the intensity
is reduced to 10%. Display intensity will increase automatically to set value when any key is pressed or any
event occurs.
ALARM INDICATORS
Enter
Enter PIN to
Login
Press Login Button
Login Successful and
now the value can
be configured. Press
Enter to Configure.
Change the Value
using up/down
navigation and Press
Enter to save.
Enter
Enter
Login
Window
Enter