![background image](http://html1.mh-extra.com/html/eaton/ec500/ec500_operation-handbook_3906325074.webp)
EC500 Controller Handbook
Copyright © 2019 Eaton Corporation. All Rights Reserved.
Issue A March 2019
Page 74 of 107
Parameter
Description
Default Value
Where to find:
Main Menu>System
Config>Cabinet
Config>Fan Config
Fan Sensing
Enable or disable the fan sensing.
Disable, Enable
Main Menu>System
Config>Cabinet
Config>Fan
Config>Fan Sensing
HARDWARE CHANNEL MAPPING
For using system functions, all the required logical channels need to be mapped to respective channels in
hardware. The mapping must match the system wiring and needs to be done carefully.
A wrong hardware mapping may result in malfunctioning of system.
Following mappings shall be defined:
•
Voltage Channels on DCIF boards
•
Current Channels on DCIF boards
•
LVD Drive Channels on DCIF or PFC boards
•
Potential Free Input Ports on DCIF or PFC boards
•
Potential Free Output Ports on DCIF or PFC boards
The first voltage channel on each DCIF shall be wired to Bus Voltage. First channel of first
DCIF shall be mapped to Bus Voltage.
CHANNEL NAMING CONVENTION
DCIF Voltage channels
are referred as DCIF
x
_VOLT_CH
y
, where
x
is DCIF board number (1 -4) and
y
is voltage
channel (1-4 or 1
–
6) depending on the particular DCIF board. For
DCIF 4V2C Shunt board
y
varies from 1
–
4,
for
DCIF 6V7C Shunt board
it varies from 1
–
6 and for
DCIO 6V3C Shunt board
it varies 1
–
6.
DCIF Current channels are referred as DCIFx_CURR_CHy, where x is DCIF board number (1 -4) and y is current
channel (1- 2 or 1
–
7) depending on particular DCIF board. For DCIF 4V2C Shunt board y varies from 1
–
2, for
DCIF 6V7C Shunt board it varies from 1
–
7 and for DCIO 6V3C Shunt board it varies from 1
–
3.
DCIF Temperature channels
are referred as DCIF
x
_TEMP_CH
y
, where
x
is DCIF board number (1 -4) and
y
is
temperature channel (1- 2 or 1
–
3) depending on particular DCIF board. For
DCIF 4V2C Shunt board
y
varies
from 1
–
2,for
DCIF 6V7C Shunt board
it varies from 1
–
3 and for
DCIO 6V3C Shunt board it varies from 1 - 2
.
DCIF LVD channels
are referred as DCIF
x
_LVD_CH
y
, where
x
is DCIF board number (1 -4) and
y
is drive (1- 2 or
1
–
5 or 1 - 3) depending on the particular DCIF board.
DCIF PFC inputs
are referred as DCIF
x
_PFC_IN
y
, where
x
is DCIF board number (1 -4) and
y
is PFC input (1- 8) of
the particular DCIF board.