![background image](http://html1.mh-extra.com/html/eaton/ec500/ec500_operation-handbook_3906325083.webp)
EC500 Controller Handbook
Copyright © 2019 Eaton Corporation. All Rights Reserved.
Issue A March 2019
Page 83 of 107
•
Click on the appropriate menu item on the left.
•
Or click on a block (Input / Rectifier / Battery / Load) to view status of that block.
•
To change a setting click the “Edit” link on top right of display pane. This will enable editing.
•
Now click on required text field, type the new value, then click
Save
in the top right of display
window. You can change multiple items before clicking on
Save
button.
•
Click
Logout
(top right of window) to log out.
COMMUNICATION VIA A NETWORK MANAGEMENT SYSTEM USING SNMP
The EC500 Controller can be configured to allow access by a Network Management System (NMS), and/or to
send alarms as SNMP traps to two different SNMP trap receivers. Two users for SNMPv2 and Eight for SNMPv3
A MIB file is available for EC500, obtain it from your Eaton representative.
➢
To setup SNMP Communications
•
Set up Ethernet Communications (see details on page 79).
•
On the web, go to Home
Settings
Communication Settings
SNMP.
•
Set the SNMP Access and specific protocol parameters
SNMP ACCESS CONFIGURATIONS
User shall set SNMP access protocol and related access parameters before SNMP manager can access EC500
over SNMP. Some parameters depend upon type of access selected.
SNMP Access
Parameter
Description
Range, Default
Value
Where to find:
SNMP Port
Port for access by SNMP Manager
161, not settable
SNMP Access
Type
Select SNMP protocol for access by
SNMP Manager
SNMPv2c
SNMPv3
Default:
SNMPv3
Home> Settings>
Communication
Settings>SNMP>SNMP
Type
SNMPv2 Access Configuration
Set following parameters when SNMP Access Type is set to SNMPv2