![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-elc-series/cutler-hammer-elc-series_basic-training-manual_3940555005.webp)
Hardware Overview
NOTE:
The following items are typical and may vary depending on
the model number of your ELC processor.
Item
Description
1
Status Indicators:
•
Power
•
Error
•
Run
•
Batt. Low (units with Clk/Calendar)
2 Run/Stop
switch
3
(2) Digital 7-segment displays (on select models)
4
Digital I/O terminals
5
Din rail clip
6
Analog I/O terminals
7
I/O point indicators
8
COM 1 (RS-232) (Rx) indicator
9
COM 2 (RS-485) (Tx) indicator
10
COM 1 (RS-232) programming port
11 EATON
nameplate
12 Extension
port
13
Receptacle for expansion unit
14
DIN rail slot (35mm)
15
Expansion unit clip
16
COM 2 (RS-485) communication port
17
DC power input
18
RS-485 cable (included accessory)
19
Power input cable (included accessory)
20 Battery
cover
21
Battery socket connection
22 Battery
mount
Pub. No. TR05003001E
For more information visit:
www.EatonElectrical.com
5