![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-elc-series/cutler-hammer-elc-series_basic-training-manual_3940555011.webp)
Software Overview
Options Menu
COMMUNICATION SETTING:
Opens the window to the
right. Allows you to choose the COM Port, Baud Rate and
Station Address for communications to the ELC, along with
Retries and Retry Delay settings.
*CHANGE ELC TYPE:
Opens the ELC Type Setting dialog
shown on page 10.
Allows you to set the type of ELC on which
the currently open project will be used.
AUTOSAVE SETUP:
Opens a window that allows you to
set software auto save features to occur either at the beginning
of a compile function or at a specific interval (minimum is 5
minutes). NOTE: By default, the Auto Save box is unchecked.
FONT SETTING AND COMMENT FORMAT:
Opens a
window to configure colors and fonts used in the program.
*SET ELC DATE AND TIME:
If an ELC is
connected, this opens the window to the right,
which lets you synchronize the clock in the
ELC.
PROMPT TO EDIT DEVICE
COMMENT:
When this option is checked,
the software will automatically pop up a window
that has a field for entering a device comment
immediately after you enter an address by
direct typing command in a programming
window.
* Available only when a project is open.
Pub. No. TR05003001E
For more information visit:
www.EatonElectrical.com
11