Connecting to the ELC
To connect to a new ELC:
•
Open
ELCSoft
•
Use the ELC programming cable (part number ELC-CBPCELC3) to connect a serial port on
your PC to the port on the front of the ELC processor.
•
Choose
OPTIONS>COMMUNICATION SETTING, and choose the port to which the
programming cable is connected in the window.
(NOTE: The Technical Support and Services team
has had success using various USB to serial converters to communicate to the ELC product line as well.)
•
Set
Station Address to 1.
•
Select
Communication>ELC Information.
o
The software will attempt to communicate to
the ELC.
•
A window similar to the one shown here should
appear relatively quickly.
o
If this window does not appear, check the
cable connection and be sure that you have
the correct COM port and address chosen
under the Options menu. The software
should auto-detect the correct electrical
settings for ELC communications.
Pub. No. TR05003001E
For more information visit:
www.EatonElectrical.com
13
