EasyLine RM-208 CB.13.01, Инструкции по эксплуатации и монтажу

Страница: 12 / 16

RM-208 CB.13.01 Easy Line Documentation
RDN 10000795
12
20.03.2019

Pull the fuse from the holder.

Insert the new fuse into the holder.
Use only the UL listed fuses that are mentioned in chapter 11 “Technical specifications“ on page
16.
(Shut-off after one hour at 135% of the nominal current.)

Place the transparent plastic cap of the fuse holder.

Position the housing cover on the bottom part of the housing and tighten the six screws evenly.

Switch on the supply voltage again.
7.2 Cleaning the controller
Wipe only with a damp cloth if outside of device is soiled.
7.3 Manufacturing
The filter control system RM-208 CB was manufactured by:
RECO Gesellschaft für Industriefilterregelung mbH
Junkersring 11
53844 Troisdorf
Germany
Fon +49 (0) 2241 39704-0
for:
Norbert Heinrich
Automatisierungtechnik
Feldstraße 16
32549 Bad Oeynhausen
Germany
Fon +49 (0) 5734 6002318
Fax +49 (0) 5734 6002319
E-mail: mail@nheinrich.de
Please contact Norbert Heinrich to obtain technical support.