Cleaning and maintenance
USA
AFTER SALES SUPPORT
16
USA
+1 877 386 8264
Cleaning and maintenance
NOTICE!
Risk of short circuit!
Water that has penetrated the power cord or the
power supply unit may cause a short circuit.
− Never immerse the power supply unit or the 5 V
plug in water.
NOTICE!
Risk due to improper operation!
Improper handling of the shaver may result in damage.
− Do not use any aggressive cleaners, brushes
with metal or nylon bristles, sharp or metallic
cleaning utensils such as knives, hard scrapers
and the like. They could damage the surfaces,
the shaving foil and the shaver blades.
Daily cleaning after a dry shave
1. Before cleaning, pull the 5 V plug
8
out of the shaver (see
fig. A
and
B
).
2. Use the On/Off switch
5
to turn off the shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons
4
to release the shaver head
2
(see
fig. E
).
5. Pull the shaver head up and off.
6. Knock the shaver head out gently over a sink to remove stubbles.
7. Without the shaver head mounted, use the On/Off switch
5
to switch the
shaver on for approx. 5 – 10 seconds to dispel any stubble from the shaver
blades
3
.
8. Firmly mount the shaver head on the shaver until the locking mechanism
audibly engages (see
fig. F
).
9. Place the protective cap
1
on the shaver.
The shaver is now ready for use again.
zur
r
t
t
the sink.
the sin
ease button
ase button
er head up a
r head up a
ver hea
r hea
Freigabe
ay result in da
esult in
eaners, brushe
aners, brus
es, sharp or me
sharp or
as knives, hard
knives, ha
uld damage th
uld damage
d the shaver b
the shaver
a dry shave
a dry shave
V plug
V plug
Fr
out o
o
urn off th
urn o