AFTER SALES SUPPORT
USA
Cleaning and maintenance
g
19
USA
+1 877 386 8264
Replacing the shaving foil unit
If the shaving foil unit is damaged, it must be promptly replaced. We generally
recommend that you replace the shaving foil unit after 12 months of daily use.
1. Depress both release buttons
4
to release the shaver head
2
(see
fig. A
and
E
).
2. Pull the shaver head up and off.
3. Push the hooks
15
on the left and right of the shaving foil unit
16
into the
shaver head frame
17
(see
Fig. K
and
L
)
4. Pull the shaving foil unit down and out of the shaver head frame (see
fig. L
).
5. Dispose of the used shaving foil unit as described in the chapter “Disposal”.
6. Place the new shaving foil unit in the shaver head frame so that:
a. the guide braces inside the shaver head frame
17
extend into
the guide grooves outside along the shaving foil unit
16
and
b. the recess in the shaving foil unit
16
is on the same side as the
recess inside the shaver head frame
17
(see
fig. K
and
L
).
7. Place two fingers on the back side of the integrated trimmer.
8. Push the shaving foil unit into the shaver head frame until the hooks
15
au-
dibly lock into the shaver head frame.
9. Firmly mount the shaver head on the shaver until the locking mechanism
audibly locks into place (see
fig. F
).
10. Place the protective cap
1
onto the shaver (see
fig. A
).
Your shaver is now ready for use again.
Replacing the shaver blades
We recommend replacing the shaver blades after 12 months of daily use. The
two shaver blades must always be replaced at the same time.
1. Depress both release buttons
4
to release the shaver head
2
(see
fig. E
).
2. Pull the shaver head up and off of the shaver.
3. Pull the shaver blades
3
straight up and out of their brackets (see
fig. I
).
4. Dispose of the used shaver blades as described in the chapter “Disposal”.
5. Mount the new shaver blades on the brackets.
6. Firmly mount the shaver head
2
on the shaver until the locking mechanism
audibly locks into place (see
fig. F
).
7. Place the protective cap
1
onto the shaver (see
fig. A
).
Your shaver is now ready for use again.
zur
dy fo
dy
e shaver b
e shaver
nd replacing
nd replacing
blades mu
lades m
h re
re
Freigabe
me so
e
be
exten
exten
foil unit
oil unit
be
16
and
an
on the same side
the same
(see
e
fig. K
fig. K
and
an
K
L
the integrated tri
e integrated
e shaver head fram
haver head fr
d frame.
ame.
ead on the shaver
ead on the sh
(see
(see
fig. F
fig. F
).
)
p
p
F
1
onto the
onto t
use agai
use
