AFTER SALES SUPPORT
USA
Handling
g
15
USA
+1 877 386 8264
Using the trimmer
NOTICE!
Keep in mind that the trimmer always generates a straight cut-
ting edge. If you do not want a straight cutting edge, you must
hold the shaver at an angle.
For hard-to-reach areas or for very precise cuts, use a comb to
check the hair you intend to trim with the trimmer and the cut
length.
Use the trimmer as follows:
1. Move the trimmer
14
all the way out until it audibly locks into place
(see
fig. D
).
2. Use the On/Off switch
5
to turn the shaver on (see
fig. A
).
3. Slowly guide the trimmer up to the hair you intend to cut.
Always use short strokes to cut your hair.
4. Turn the shaver off.
5. Clean the shaver as described in the chapter “Daily cleaning after a wet
shave” or “Daily cleaning after a dry shave”.
Using the travel guard
The shaver is equipped with a travel guard that prevents the shaver from acci-
dentally activating.
Activating the travel guard
− Hold the On/Off switch
5
down for approx. 4 seconds (see
fig. A
). The
shaver will automatically deactivate and the battery symbol will flash four
times in green.
The travel guard is now active.
Deactivating the travel guard
NOTICE!
Connecting the shaver with the power supply unit and inserting
the power supply unit in a socket will automatically deactivate
the travel guard.
1. Hold the On/Off switch
5
down for approx. 4 seconds (see
fig. A
).
The battery symbol will flash twice in green in the process.
The shaver will now automatically switch on.
2. Briefly push the On/Off switch to turn off the shaver.
The travel guard is now deactivated.
zur
vel
ve
witch
witch
r
tomatically
tomatically
een.
een.
uard is now
uard is n
Freigabe
see
fig. A
ig. A
).
).
tend to cut.
tend to cut.
chapter “Daily cle
apter “Daily
ry shave”.
y shave”.
rd
a travel guard tha
a travel guard
uard
uar
ow