Handling
USA
AFTER SALES SUPPORT
14
USA
+1 877 386 8264
Handling
Dry shave
NOTICE!
We recommend a dry shave before you wash. After washing, you
skin is slightly swollen. As a result, shavers are often unable to
reach the entire length of your beard hair so the shave will be less
thorough.
For a dry shave, follow the steps below:
1. Take the protective cap
1
off of the shaver (see
fig. A
).
2. Use the On/Off switch
5
to turn the shaver on.
3. Use your free hand to stretch the part of your face you intend to shave.
4. Apply gentle pressure to move the shaver head
2
perpendicular to the
direction of hair growth.
5. After a few strokes, use your free hand to check the results and repeat step
4 if necessary.
6. Shave as described in steps 2 – 4.
7. If necessary, use the trimmer
14
as described in the chapter “Using the
trimmer” (see
fig. D
).
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter “Daily cleaning after a dry
shave”.
Wet shave
1. Dampen your face and apply shaving cream or gel to your face.
2. Take the protective cap
1
off of the shaver (see
fig. A
).
3. Use the On/Off switch
5
to turn the shaver on.
4. While applying gentle pressure, move the shaver head
2
perpendicular to
the direction of hair growth.
5. After a few strokes, use your free hand to check the results and repeat
step 4 if necessary.
6. Shave as described in steps 2 – 4.
7. If necessary, use the trimmer as described in the chapter “Using the
trimmer”.
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter “Daily cleaning after a wet
shave”.
zur
e and apply
e and apply
ctive cap
ctive cap
u
1
ff switch
ff switch
u
gen
gen
Freigabe
u intend to s
end to s
b
perpendicular
perpendicu
eck the results and
the results
s described in the
escribed in the
u have finished sh
u have finishe
bed in the chapte
bed in the ch