EASTMAN 3059, Инструкции по модификации

Страница: 96 / 115

HEALTH IMAGING
© Eastman Kodak Company
Publication No. 7C8299
15MAR99
Supersedes 7C8299
30JUL98
MODIFICATION INSTRUCTIONS
for the
Kodak X-Omat MULTILOADER 300
Service Code: 3058
Modification No. 41/43
Kodak X-Omat 270 RA PROCESSOR
Service Code: 3059
Modification No. 23/24
Kodak X-Omat 180 LP/180 LPS PROCESSORS
Service Codes: 3227, 3198
Modification No. 10/12
Type 2
Purpose: To upgrade the DRYER RACK with new RACK SIDEPLATES to improve reliability.
Mods 10/23/41 will:
- improve the film path by making changes to the positions of the “F” and “E” ROLLERS.
- make changes to the diameter of the new “F” and “E” ROLLER GEARS.
- make the bottom GUIDE SHOE adjustable.
- include new SIDEPLATE BEARINGS which have a longer service life.
Mods 12/24/43 will:
- reduce wear and binding in the RACK by installing new BEARING WASHERS.
Important
Use qualified personnel to install this modification.
Service Effects: Make changes to the Illustrated Parts Lists to include the new part numbers.
Special
Requirements: None
Serial Numbers: There are two modifications for the PROCESSORS. The modifications were combined
since they are both for the DRYER RACK. See “Serial Numbers:” on Page 2.
Installation Time: 1.5 hours
Special Tools: None
Parts Status: Parts are available at Service Parts Management.
Parts Requirements: See “Parts Lists:” on Page 2.