EASTMAN 3059, Инструкции по модификации

Страница: 61 / 115

2 29JUN96 – 8B6658
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and
makes no warranty, express or implied, with respect to this information. Kodak shall not be
liable for any loss or damage, including consequential or special damages, resulting from any
use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
Important
Use qualified service personnel to install this modification.
This equipment includes parts and assemblies sensitive to damage from electrostatic
discharge. Use caution to prevent damage during all service procedures.
Table 1
Modification Kit 8B6612 includes:
Service Effects: See Pages 11 - 15 for part numbers and configuration changes. Keep these
pages with the Illustrated Parts List for the PROCESSOR for future
reference.
Special Requirements: None
Serial Numbers: 270 RA PROCESSOR 101 - 2397
MULTILOADER 300 101 - 1040
180 LP PROCESSOR 101 - 1644
Special Tools: TL-1466 ELECTRIC DRILL
1/8 in. DRILL BIT
CENTER PUNCH
HACK SAW or TIN SNIPS
Installation Time: Approximately 1 hour
Parts Status: Available in Service Parts Management
Parts Requirements: See the Parts List below
Part No. Description Quantity
5B6890 WASH RACK ASSEMBLY 1
5B6630 DOLE VALVE ASSEMBLY -1/2 GPM 1
1C7642 COVER - TUBING ASSEMBLY 1
1C7643 FASTENER - BUTTON 3
8B6658 Mod Instructions 1