EASTMAN 3059, Инструкции по модификации

Страница: 55 / 115

MODIFICATION INSTRUCTIONS, TYPE1
12 28JUL95 – 5B6773
Installing the New SPRINGS in the WASH RACK
[5] Remove from both the LOWER and UPPER
IDLER GEARS on the WASH RACK:
• SHOULDER SCREW
• BUSHING
• IDLER GEAR
[6] Remove and discard the 6 SPRINGS from the
WASH RACK
a. To remove the top SPRING on the non-drive
side of the RACK, do the steps below.
1. Remove the SPRING from around the
BEARING.
2. Place the SPRING between the teeth of
the GEAR.
3. Rotate the GEAR.
[7] Install the 6 new SPRINGS, Part No. 1C7107.
[8] Install the:
• IDLER GEARS
• BUSHINGS
• SHOULDER SCREWS
Installing the New SPRINGS in the DRYER RACK
[9] Remove the following parts from the UPPER
SQUEEGEE ROLLER on the non-drive side of
the DRYER RACK:
• SPRING and discard
• E-RING and keep
[10] For access to the GEAR PIN, move the UPPER
SQUEEGEE ROLLER toward the drive side of
the PROCESSOR.
[11] Remove from the drive side of the UPPER
SQUEEGEE ROLLER:
• GEAR PIN
• SPROCKET
• WASHER
• SPRING and discard
[12] Reverse Steps 9 through 11 to install the 2 new
SPRINGS, Part No. 1C7106.
H127_0179AA
14 BEARINGS
H127_0179ACA
SCREW
SHOULDER
BUSHING
GEAR
LOWER IDLER
6 SPRINGS
UPPER IDLER
GEAR
H127_0201AA
ROLLER
LOWER SQUEEGEE
drive side
WASHER
SPROCKET
GEAR PIN
2 SPRINGS
ROLLER
UPPER SQUEEGEE
H127_0201ACA