E-flite Diamante 5e ARF Assembly Manual
Final Assembly
Required Parts
• Fuselage assembly
• Canopy
• Receiver
Required Tools and Adhesives
• Hook and loop tape
• Masking tape
• Canopy Glue (PAAPT56)
• Felt-tipped pen
• Sandpaper
1. Secure the receiver inside the fuselage using hook
and loop tape. Follow the instructions provided with the
receiver when installing the antenna.
2. Place the canopy onto the hatch. Use a felt-tipped pen
to trace the outline of the canopy onto the hatch.
Note
: Use care not to change the position of the back of
the canopy hatch.
2. Lightly sand the hatch inside the line drawn in the last
step. Also sand the inside of the canopy where it contacts
the hatch. Use rubbing alcohol and a paper towel to
wipe down the two contacting surfaces.
