18
E-flite Diamante 5e ARF Assembly Manual
3. Attach the wing to the fuselage using the 10-32 nylon
wing bolt.
4. Use six CA hinges to attach the elevator and
stabilizer. Use the same technique as the aileron
hinges when installing the elevator hinges.
5. Install the elevator control horn as shown following
the same technique as the aileron control horn. Note the
position of the control horn.
6. Slide the stabilizer into the fuselage. Make sure the
control horn faces toward the bottom of the fuselage.
Measure the distance from the center of the fuselage to
each stabilizer tip to center the stabilizer in the fuselage.
