15
E-flite Diamante 5e ARF Assembly Manual
2. Slide the 6-32 x 1
1
/
8
" machine screw through the
bottom hole of the landing gear. Secure the screw using a
6-32 lock nut. Thread a second lock nut onto the screw.
3. Slide a #6 washer onto the screw, then slide the wheel
onto the screw. Slide a second #6 washer onto the screw
and secure the wheel using a 6-32 lock nut. Make sure
the wheel can turn freely after installing the final nut.
4. Test fit the wheel pant onto the landing gear. Sand the
notch in the wheel pant if necesary so it fits over the lock
nut that is against the landing gear.
5. Position the wheel pant so it is parallel to the top of the
fuselage as shown.
