1
E-flite Diamante 5e ARF Assembly Manual
11. Place the servo into the opening in the wing. Use
a felt-tipped pen to mark the locations for the servo
mounting screws.
12. Use a pen drill and 1/16 in (1.5mm) drill bit to drill
the four locations for the servo mounting screws.
13. Apply a few drops of thin CA to each of the four
holes. This will harden the underlying wood and help
in preventing the screws from pulling out.
14. Secure the servo in the wing using the screws
provided with the servo. Note the servo horn faces
towards the aileron.
